GLOCK’s headquarters is located in Wagram, 48km north ward from Vienna, which was the setting for “Golden Adele” (Klimt)

Inspired by Klimt’s golden foil paintings that came to Japan last year,

And the Gulf War It is a GBB production art work that tied up 1,000 “Desert Storm” commemorative model of GLOCK 17 which appeared from the country and became a best seller after the recapture of Adele and the world war II sorrow.

The pure 99.99gold slide includes the stamp of NEW WORLD ORDER COMMEMORATIVE/OPERATION DESERT STORM,

The stamp of GLOCK 17, the watermark engraved with all the country names that cooperated in the Gulf War, stacked with 99.99% gold foil japanese and japanese lacquer URUSHI, and randomly arranged red sum (transparent Bordeaux color).

There is a scratch mark due to the movable after production.

The base is Tokyo Marui GLOCK 17 GEN3
The slide is GUARDER, the outer barrel is a manufacturer unknown metal barrel in which the chamber and barrel are jointed with a straight screw and screw seal packing locked.

GUARDER’s dessert storm is selling paint, but in fact it is quite vulnerable.

This slide is URUSHI coated with Japanese lacquer, so the surface is very sturdy. The surface hardness of lacquer is “4” of “Mohs hardness”. It’s the same hardness as iron

This 99.99 pure gold GLOCK17 is on sale at Yahoo Auctions in Japan

GLOCK 17/OPERATION DESERT STORM/世界限定1,000本刻印/黄金のアデーレ/純金モデル/GBB/ マルイ/新品加工芸術品/グロック17
https://page.auctions.yahoo.co.jp/jp/auction/d421257712

RONI PISTOL CARBINE CONVERSION/CAA AIRSOFT DIVISION/Pure Silver Custom/Marui M9A1 Included/Frip-Up Site Included

5 position Pad stock / Up and down movable cheek rest (diamond python genuine leather) / fore-grip foldable movable

Considering the use in the field, it is impossible to detach the gun without removing four front both side rail screws with a hexagonal wrench in the normal RONI, but I have improved the cancer detachable without using any tools than the intention of me (seller). Even in the field or in the seating area, it is possible to detach the BERETTA in a few seconds.

If you pull out the sefty pin of part No 16(17) of the same package RONI instruction manual with one hand, it is possible to all parts. Since the sefty pin contains a tension spring bar, it does not come off during the fight or transportation.

It is a metal itself that is subjected to an aging pro session by pasting silver foil to every corner so that silver (pure silver) shines even if a fine uneven part or pad stock is extended. The surface is coated with japanese lacquer URUSHI , so the monopolymer body is strongly protected.

It withstands on-site use, speeds up, as a decoration of stores and homes

Roni and M9A1airsoft are now on sale at Yahoo Auction ID (swffmid) in Japan

RONI/CAA/カスタムカービン/【未使用】/純銀製/漆/完動品/東京マルイ/M9A1【付属】/芸術作品/サバゲー/Fallout/BERETTA/トイガン/店舗装飾

https://page.auctions.yahoo.co.jp/jp/auction/t704584024

The inner diameter of the ARES TX bolt action system , inner barrel is 6.01mm

If you purchase, first measure the initial speed.

The first speed of the WindRunner M96 was 85m/s. 0.20g BB bullet

Maintenance was done before replacing it with a third-party part.

1)
Plastic-only abrasive with very thin particles inside the inner barrel cavity.

Use gauze and repeat twice.

The inside of the cavity is round and round again and again, and polished while rotating.

2)
Wash with a reagent of Rigloin. Repeat twice using gauze.

3)
Finally coat edwith fluorine.

Fluorine fills fine scratches. It looks like a mirror and does not adhere to dirt.

The inside and outside of the cavity are also coated and finally polished with gauze or cloth

======
About the grease to use

1)
All grease at the time of purchase is washed off with reagent Rigroin

2)
Air control parts vacuum grease.

The price of vacuum grease is particularly expensive at 140USD

3)
The moving part is silicon grease.

4)
The fixed part is teffalon gris.

Paint each grease while stretching thinly so as not to mix.

======
The initial speed after maintenance is now 112 m/s

BB bullet fired for the first time. As a result, it landed 100% on the target 30m away.

Always use screw-only sand oil when removing or mounting screws

私はBB弾を撃ったことがありません。
なぜなら、購入したばかりのライフルを射撃前に分解したからです。

しかし、物理的精度を上げる達人です。

THE ARES product TX system,
bolt action,

This sniper rifle are compatible with the VSR10, but the chamber does not match the inner diameter of the outer barrel and there is no third-party product.

I made this impossible thing possible for the first time in the world.

Video explains how to create the chamber using a third-party part for VSR10 and a maple leaf product.

The diameter of the chamber of the VSR10 does not fit into the MSRTX system.

In addition, the length of the chamber is also different. The mounting screw position is also different. The biggest challenge is the ability to adjust long hop boards.

Please watch the video of my bottomless effort. Converting all impossible to possible

to be continues (2)

I was starting airsoft guns

made it myself design

adios!