The inner diameter of the ARES TX bolt action system , inner barrel is 6.01mm
If you purchase, first measure the initial speed.
The first speed of the WindRunner M96 was 85m/s. 0.20g BB bullet
Maintenance was done before replacing it with a third-party part.
1)
Plastic-only abrasive with very thin particles inside the inner barrel cavity.
Use gauze and repeat twice.
The inside of the cavity is round and round again and again, and polished while rotating.
2)
Wash with a reagent of Rigloin. Repeat twice using gauze.
3)
Finally coat edwith fluorine.
Fluorine fills fine scratches. It looks like a mirror and does not adhere to dirt.
The inside and outside of the cavity are also coated and finally polished with gauze or cloth
======
About the grease to use
1)
All grease at the time of purchase is washed off with reagent Rigroin
2)
Air control parts vacuum grease.
The price of vacuum grease is particularly expensive at 140USD
3)
The moving part is silicon grease.
4)
The fixed part is teffalon gris.
Paint each grease while stretching thinly so as not to mix.
======
The initial speed after maintenance is now 112 m/s
BB bullet fired for the first time. As a result, it landed 100% on the target 30m away.
Always use screw-only sand oil when removing or mounting screws
Japan urushi artist inventor 